Nozzles and accessories

Bosch 980CC Injectors. Injectors for use with petrol, ethanol, methanol etc.Bosch 980cc Motorsport Injectors (EV14) An unmodified injector. By installing an adapter, it can be extended to 61mm between the O-rings. There is also a replaceable filter in the top adapter. We have adapters that are suitable for this injector.     Specifications: - Supplied without adapter - Flow / min at 3bar according to Bosch test environment: 670g / 980cc / 980cm3 -Resistance: 12 ohm / high ohm. - Spray pattern: 30 degrees conical - Injector tip: long (xT) -Connector: Standard Bosch EV1 Mini Timer Jetronic -E85 / E100 compatible. - Can also be used with other fuels. NOTE! If the injectors are to be run on methanol, they must be flushed with regular fuel after use. This means that the injectors should not be left with methanol over time. - Upper and lower O-rings made of Viton. -Article number: 0280158040 -See accessories for suitable electrical connectors and adapters. -Price per piece 29 PSI (2 bar) 720cc / min = 69 lb / h 43.5 PSI (3 bar) 900cc / min = 86 lb / h 58 PSI (4 bar) 1038cc / min = 99 lb / h 78.5 PSI (5 bar) 1170cc / min = 111 lb / h 88 PSI (6 bar) 1284cc / min = 122 lb / h 101.5PSI (7 bar) 1344cc / min = 128 lb / h     To extend the injector (61mm between the O-rings), one of these adapters is used: - Top adapter: 14mm short - Bottom adapter: 14mm short without filter

Read more less

Top adapter used on top of the injector to extend the injector tip.Specifications Top adapter to extend the injector Primarily used on short injectors, such as Bosch 2200cc, etc. With built-in filter – the filter can be removed Made of aluminum and painted black Viton O-ring Locking clip included Extends the injector by 25 mm SKU: SPD02SA0116

Read more less

Nozzle extension used to extend the nozzle tip.Specifications Primarily used on short injectors such as Bosch 630cc, 980cc, 1200cc, 1300cc, etc. No built-in filter Fits on the nozzle tip SKU: SPD02SA013 Price per piece

Read more less

Top adapter used on top of the nozzle to extend the nozzle tip.Specifications Top adapter to extend the nozzle Primarily used on short nozzles such as Bosch 630cc, 980cc, 1200cc, 1300cc, etc. With built-in filter – filter can be removed Made of aluminum and painted black Viton O-ring Locking clip included Extends the nozzle by 15 mm SKU: SPD02SA012

Read more less

Injector lock / clip. Standard clip for most original Bosch injectors. Fits most original Bosch injectors SKU: SPD02SA0113 Price per piece

Read more less

Bosch 2200cc high ohm injectors represent the next generation of high flow injector technology. Fast response, excellent flow pattern, and compact design. 100% compatible with ethanol, methanol, and E85. Especially suitable for turbocharged and supercharged engines with high fuel pressure.Static flow rate 43.5 PSI (3 bar): 2200 cc/min = 210 lb/h 58 PSI (4 bar): 2550 cc/min = 240 lb/h 78.5 PSI (5 bar): 2865 cc/min = 273 lb/h 88 PSI (6 bar): 3155 cc/min = 300 lb/h 101.5 PSI (7 bar): 3350 cc/min = 320 lb/h Specifications Coil Resistance: 8.5 Ohm Dead Time: 0.45ms at 14V Spray Pattern: Conical (30°) | Spray Angle: Straight (0°) Connector: Denso / Sumitomo Injector: EV 14K (Compact) Injector Length (O-ring to O-ring): 33.6 mm Diameter: 16 mm | O-ring: 14.5 mm Viton Approved for: Gasoline, alcohol, methanol, E85, CNG NOTE! Do not use with MBTE fuel. When disassembling, the injectors must be kept sealed from oxygen.To extend the injector to EV 14L Long (60–65mm between O-rings), use adapter SPD02SA0116.

Read more less