Boost Race Fuel E85 is a fuel with 85% ethanol and 15% gasoline, with added Eurol additive and lubricant. It's the perfect ethanol for those on a slightly lower budget – E85 uses slightly less fuel per hp and is also suitable for ice racing cars as it makes cold starts in winter easier.Exhaust temperature is slightly higher and E85 provides slightly less power than E100. It is important to adjust/map the engine with the correct fuel to achieve maximum power. Teflon hoses with stainless steel filters are a necessity.Specifications
Composition: 85% ethanol, 15% gasoline
Additive: Eurol
Volume: 204 liters
Approved by: Jonus Racing
Shipping: The recipient address must be staffed between 08:00–16:00 on all weekdays.⚠️ IMPORTANT: For closed circuits or approved motorsport facilities only. Forbidden on public roads.
Pure ethanol-based racing fuel. Now delivered pre-mixed with lubricant additive.Boost Race Fuel E100 is based on 99.9% pure alcohol, with a very high calorific value. Boost Race Fuel E100 can be mixed with 15% 98-octane gasoline to create E85. Due to the purity of E100, the combustion and power of this E85 will be better than standard E85.It is important to tune/map the engine with the correct fuel to achieve maximum power.References: Boost Racefuel E100 has been thoroughly tested over time and approved by Jonus Racing. Fredric Aasbø and Tor Anders Ringnes race with Boost Race Fuel E100.Shipping: The recipient's address must be staffed between 8 AM and 4 PM on all weekdays.⚠️ IMPORTANT: For closed courses or approved motorsport facilities only. Prohibited on public roads.
Pure ethanol-based racing fuel.Boost Race Fuel E85 is a fuel with 85 percent ethanol and 15 percent gasoline. Boost Race Fuel E85 contains Eurol additive. This is the perfect ethanol for those on a slightly lower budget, as E85 uses slightly less fuel per horsepower. E85 is also suitable for ice racing cars, as it makes cold starts in winter easier.Exhaust temperature is somewhat higher, and E85 provides slightly less power compared to E100.It is important to tune/map the engine with the correct fuel to achieve maximum power. Teflon hoses with a stainless steel filter are a necessity. We sell a complete range of everything you might need to build a fuel system.Now supplied with lubricating additive.References: Boost Racefuel E85 has been thoroughly tested over time and approved by, among others, Jonus Racing.Shipping: The recipient's address must be staffed between 8 AM and 4 PM on all weekdays.⚠️ IMPORTANT: For closed circuits or approved motorsport facilities only. Forbidden on public roads.
The Walbro GST 450 is an in-tank pump that works great for ethanol. A compact pump that provides enough flow and is easy to install in the tank.Suitable for mounting on original fuel pump assemblies for many cars, including Volvo, Nissan, Saab, Subaru, and Toyota.Specifications
Flow: 450 L/h
Length: 121 mm
Top diameter: 39 mm
Bottom diameter: 50 mm
Inlet: 11 mm
Outlet: 11 mm
Custom fan shroud for Toyota Supra X-Line Performance Aluminum Radiator 1993–1998 and Mishimoto Race Line High-Flow 12" fans.Features
Made from aluminum for the lightest possible weight
Pre-drilled holes for radiator mounting
Pre-drilled holes and welded nut for mounting 2x Mishimoto Race Line High-Flow 12" Fans
SKU: SUP-93-SRD
Mishimoto has developed an all-new universal dual pass oil cooler for enthusiasts who demand the best from their vehicles. Keeping oil temperatures under control is crucial for a successful day on the track, street, or strip.High engine temperatures can promote engine wear and lead to serious internal engine damage. Constructed from high-pressure internal tubing rated at 120 PSI and built to handle the most extreme conditions. With 8mm external fins and 19 rows, it offers an extremely large surface cooling area. Can also cool transmission and power steering fluid.Specifications
Material: 6061 Aluminum
Rows: 19
Core Height: 19.8 cm
Core Length: 30 cm
Core Depth: 3.6 cm
Core Size: 30 cm x 19.8 cm
Overall Height: 21 cm
Overall Length: 37.6 cm
Overall Width: 4.49 cm
Inlet: -10AN
Outlet: -10AN
Fluid Capacity: 0.75 liters
Max Pressure: 120 PSI
Note: Only one side of the silver oil cooler features the Mishimoto logo. The stealth black option has no logo.All our Mishimoto oil coolers come with Mishimoto's lifetime warranty.
The Mishimoto X-Line aluminum radiator is the ideal upgrade from the standard Toyota Supra radiator. It will extend the life of your 2JZ engine. Lightweight 3-row core with welded aluminum end tanks, adapted to the original mounts in the Toyota Supra MK4 – easy installation without modifications.For maximum effect, we recommend installing this aluminum shroud with 2 High-Flow Mishimoto fans.Specifications
Material: Aluminum
Chassis: JZA80
Engine: 2JZGE, 2JZGTE
Fits: Toyota Supra N/A 1993–98, Toyota Supra Turbo 1993–98
Overall Height: 52.8 cm
Overall Length: 75.4 cm
Overall Width: 6.4 cm
Core Size: 40 cm x 73.7 cm
Rows: 3
Inlet: 2.9 cm
Outlet: 2.9 cm
Fill Neck: 3.17 cm
Tank Wall Thickness: 2 mm
DPI: 1855
Drain Plug Length: 1.19 cm
Drain Plug Thread: M16
Note: This item is for cars with manual transmission. For automatic transmission, purchase an additional Mishimoto Universal Transmission Cooler Kit.Included in the package
Mishimoto Radiator
Mishimoto Radiator Cap
Magnetic Drain Plug
Mishimoto Lifetime Warranty
The Toyota Supra X-Line Performance Aluminum Radiator for Toyota Supra 1993–1998 is the ideal upgrade from the standard radiator. Designed to maximize cooling efficiency, enhance engine performance, and protect against overheating – extending the lifespan of your 2JZ engine.Lightweight 3-row core with welded aluminum end tanks, adapted to the original mounts in the Toyota Supra MK4 – easy installation without modifications.For maximum effect, we recommend installing Boost's self-developed fan shroud with 2x 12" High-Flow Mishimoto fans.Specifications
Chassis: JZA80
Engine: 2JZGE, 2JZGTE
Fits: Toyota Supra N/A 1993–98, Toyota Supra Turbo 1993–98
Overall Size: 75.4 cm L x 52.8 cm H x 6.4 cm W
Core Size: 40 cm L x 73.7 cm H x 5 cm D
Rows: 3
Inlet & Outlet: 2.9 cm / 2.9 cm
Tank Wall Thickness: 2 mm
DPI: 1855
Drain Plug Length: 1.19 cm
Drain Plug Thread: M16
Filler Neck: 3.17 cm
Note: This item is for vehicles with a manual transmission. For automatic transmissions, purchase an additional Mishimoto Universal Transmission Cooler Kit.Included in the Package
Mishimoto Radiator
Mishimoto Lifetime Warranty
The Mishimoto aluminum radiator is the ideal upgrade from the standard Subaru BRZ / Toyota GT86 radiator. Lightweight with welded aluminum end tanks, designed to fit the car's original mounts – no modifications necessary.For maximum performance, we recommend installing this radiator with 2 High-Flow Mishimoto fans and an aluminum shroud.Features
Increased cooling capacity
Direct fit for GT86 / BRZ / FR-S
100% brazed aluminum core
TIG-welded
Includes magnetic drain plug and mounting hardware
Mishimoto lifetime warranty
Specifications
Overall Width: 76.5 cm | Overall Depth: 10.9 cm | Overall Height: 41.3 cm
Core Size: 65 x 35.5 cm
Rows: 2 | Inlet/Outlet: 2.9 cm
Chassis: ZC6, ZN6 | Engine: FA20, 4U-GSE
Fits
2013+ Subaru BRZ
2013+ Scion FR-S
2013+ Toyota GT86
The Straight AN8 Boost Performance PTFE Fitting is used with AN8 Boost Performance PTFE Black Nylon Braided Hose or AN8 Boost Performance PTFE Stainless Steel Braided Hose.Boost PTFE Fittings – Optimizing Your Race CarWhen building a race car that truly stands out, the choice of fittings is a crucial factor in achieving maximum performance. Boost PTFE fittings represent a high-tech alternative for car enthusiasts who want to elevate their vehicle's performance to new heights.Boost Performance FittingsSpecially developed to deliver exceptional flow without compromise. Made from the highest standard materials with precise manufacturing techniques. With larger through-bores than standard fittings, Boost Performance fittings ensure optimal flow of fuel, oil, brake fluid, or water – ideal for racers who want to push their car to the limit.Boost Standard FittingsAn excellent choice for track cars and race cars where performance is not necessarily maximized, but where quality is still important. Ideal for those who want good performance in a less intensive setting.The Difference Between Performance and StandardBoost Performance fittings are optimized for maximum flow and performance – ideal for competitive situations. Boost Standard fittings are more aimed at enthusiasts who want an economical alternative with quality and reliability.
The Straight AN10 Boost Performance PTFE Fitting is used with the AN10 Boost Performance PTFE Black Nylon Braided Hose or the AN10 Boost Performance PTFE Stainless Steel Braided Hose.Boost PTFE Fittings – Optimizing Your Race CarWhen building a race car that truly stands out, the choice of fittings is a critical factor in achieving maximum performance. Boost PTFE fittings represent a high-tech option for car enthusiasts who want to elevate their vehicle's performance to new heights.Boost Performance FittingsSpecially developed to deliver outstanding flow without compromise. Made from the highest standard materials with precise manufacturing techniques. With larger passages than standard fittings, Boost Performance fittings ensure optimal flow of fuel, oil, brake fluid, or water – ideal for racers who want to push their car to the limit.Boost Standard FittingsAn excellent choice for track cars and race cars where performance is not necessarily maximized, but where quality is still important. Ideal for those who want good performance in a less intensive setting.The Difference Between Performance and StandardBoost Performance fittings are optimized for maximum flow and performance – ideal for competitive situations. Boost Standard fittings are more aimed at enthusiasts who want an economical alternative with quality and reliability.
V3 is the latest version of the SPD fuel pressure regulator, built on a design that provides superior precision and reliability. Specially designed to work well with ethanol fuel, with new ethanol-resistant components and long service life.The regulator handles high return flows at low engine loads and ensures a 1:1 fuel pressure increase with boost pressure – even with very powerful fuel pumps at high outputs. The diaphragm is available as a spare part, so the regulator can be serviced rather than replaced.Specifications
1/8" NPT outlet at the front for fuel pressure sensor or fuel gauge
1/8" NPT outlet for vacuum connection
Adjustable base pressure: 2.7–5.1 Bar
Compatible with gasoline and alcohol (E85/E100)
Fuel pressure increases 1:1 with boost pressure
Handles power up to and over 1000 hp
For silicone hose or pneumatic connection
Fittings for the regulator included
Color: Black
SKU: SPDB13-7-5-1
Universal return flange for turbo with AN10 38mm CC connection. The AN fitting is designed for PTFE hose and is only available in Black-Black.SPD AN fittings maintain the absolute highest quality available on the market today. All fittings are anodized, making them highly resistant to external influences.Features
Designed for PTFE hose
Anodized for increased durability
Color: Black-Black
Suitable for: gasoline, methanol, ethanol, and diesel
Also works for water and oil systems
5-year warranty on all SPD AN fittings
SKU: 090210
The Mishimoto Universal R-Line Intercooler will provide ideal cooling capacity while increasing horsepower and delivering that extra boost every driver appreciates. Constructed from 6061 aluminum and TIG-welded for maximum durability and high boost pressure.The durable bar-and-plate core provides superior heat transfer and effectively reduces AITs. Robust end tanks are cast as a single piece of aluminum.Specifications
Fitment: Universal (front-mounted)
Surface Treatment: Powder Coated
CEM: 1250
Fin Pitch: 15 Fins/Inch
Max Recommended Pressure: 32 PSI
Overall Size: 79 cm L x 30 cm H x 10 cm W
Core Size: 61 cm L x 30.5 cm H x 10 cm D
Inlet & Outlet: 7.6 cm
Material: 6061 Aluminum, TIG-welded
Included in the package
Mishimoto Universal R-Line Intercooler
Mishimoto Lifetime Warranty
The Mishimoto Universal Intercooler M-Line is sleek and stylish, providing the perfect cooling capacity for smaller turbo applications. Constructed from 6061 aluminum and TIG-welded for maximum durability and high boost pressures.The durable bar-and-plate core provides superior heat transfer and effectively reduces AITs. Robust end tanks are cast as a single piece in aluminum.Specifications
Fits: Universal (front mounted)
Surface Finish: Powder-Coated
CEM: 1250
Fin Pitch: 15 Fins/Inch
Max Recommended Pressure: 32 PSI
Overall Size: 79 cm L x 30 cm H x 7.6 cm W
Core Size: 60 cm L x 30 cm H x 7.6 cm D
Inlet & Outlet: 7.6 cm
Material: 6061 Aluminum, TIG-Welded
Included in the box
Mishimoto Universal M-Line Intercooler
Mishimoto Lifetime Warranty
Enthusiasts who push their high-performance vehicles to the limit understand the importance of keeping oil temperatures down to prevent damage or engine failure. The Mishimoto Universal 19 Row Oil Cooler will extend the life of your engine by ensuring essential high-wear engine components like piston rings, skirt, and cam bearings are sufficiently lubricated with cooler oil.Specifications
Material: 6061 Aluminum
Cooler Construction: Stacked-Plate
Rows: 19
Core Height: 5.43"
Core Length: 11"
Core Depth: 1.97"
Core Size: 11" x 7.32"
Overall Height: 6.46"
Overall Length: 13"
Overall Width: 1.97"
Inlet: -10AN
Outlet: -10AN
Note: Only one side of the silver oil cooler features the Mishimoto logo. The stealth black option has no logo.All our Mishimoto oil coolers come with Mishimoto's Lifetime Warranty.
Complete package to provide optimal cooling for the Toyota Supra MK4.The package includes
1 pc Toyota Supra X-Line Performance Aluminum Radiator, 1993–1998
2 pcs Mishimoto Race Line High-Flow 12" Fan
1 pc Custom-made fan shroud adapted for 2x 12" fans from Mishimoto
Fan Shroud
Made of aluminum for the lightest possible weight
Pre-drilled holes for mounting to the radiator
Pre-drilled holes and welded nuts for mounting 2x Mishimoto Race Line High-Flow 12" Fans
With Mishimoto Race Line fans, you get maximum airflow through the radiator. This fan is intended for situations where Slim Line fans are insufficient. Large enough to handle most cooling jobs, yet small enough to fit between the radiator and the engine. The fan provides an airflow of 1700 CFM.Technical specifications
End Type: Female Snap-Plug Terminal
Material: Plastic
Color: Black (BK)
Normal Current: 11 Amps
Voltage: 12V
Housing Diameter: 11.9"
Overall Thickness: 3.70"
Blade Style: Straight
Number of Blades: 5
Fan RPM: 2900
Fan Diameter: 11"
CFM: 1700
Reverse: No
Included in the package
(1) Mishimoto Fan
Mishimoto Lifetime Warranty
With Mishimoto Race Line fans, you get maximum airflow through the radiator. This fan is intended for situations where Slim Line fans are insufficient. Large enough to handle most cooling tasks, yet small enough to fit between the radiator and the engine. The fan provides an impressive airflow of 1600 CFM.Technical Specifications
Terminal Type: Female Snap-Plug Terminal
Material: Plastic
Color: Black (BK)
Normal Current: 10 amps
Voltage: 12V
Housing Diameter: 10.9"
Overall Thickness: 3.85"
Blade Style: Straight
Number of Blades: 5
Fan RPM: 3000
Fan Diameter: 10"
CFM: 1600
Reversible: No
Included in the Package
(1) Mishimoto Fan
Mishimoto Lifetime Warranty
Mishimoto has developed a completely new universal dual pass oil cooler for enthusiasts who demand the best from their vehicles. Keeping oil temperatures in check is crucial for a successful day at the track, street, or strip.High engine temperatures can promote engine wear and lead to severe internal engine damage. The Mishimoto dual pass oil cooler is constructed from high-pressure internal tubes rated at 120 PSI and is built to handle the most extreme conditions. With 8mm external fins and 25 rows, it offers an extremely large surface cooling area. Can also cool transmission and power steering fluid.Specifications
Material: 6061 Aluminum
Cooler Construction: Tube-and-Fin
Rows: 25
Core Height: 25.8 cm
Core Length: 30 cm
Core Depth: 3.6 cm
Core Size: 30 cm x 25.8 cm
Overall Height: 29.4 cm
Overall Length: 37.6 cm
Overall Width: 4.49 cm
Inlet: -10AN
Outlet: -10AN
Fluid Capacity: 0.98 liters
Max Pressure: 120 PSI
Note: Only one side of the silver oil cooler has the Mishimoto logo. The stealth black option has no logo.Included in the package
Mishimoto Universal Dual Pass Oil Cooler – 25 Rows
Mishimoto Lifetime Warranty
The Mishimoto Universal G-Line Front-Mount Intercooler is sleek, stylish, and provides perfect cooling capacity for smaller turbo applications. Constructed from 6061 aluminum and TIG-welded for robust end tanks that can withstand high boost pressures.The bar and plate core provides superior heat transfer and effectively reduces AITs. Comes with Mishimoto's lifetime warranty.Specifications
Overall Dimensions: 62 x 30 x 7.6 cm
Core Size: 44 x 30 x 7.6 cm
Inlet/Outlet: 7.6 cm
Coating: Powder-coated
CEM: 1250
Fin Pitch: 15 fins/inch
Maximum Recommended Pressure: 32 PSI
Fitment: Universal
The Mishimoto Heavy Duty Bar & Plate Fluid Cooler fits universally for all high-performance applications. Its 17-row core ensures efficient cooling under all conditions, with a capacity of 1.32 liters for enhanced cooling capability.Features
Large 17-row core: 25.4 cm L x 19 cm H x 6.35 cm T
1.32 liter capacity for increased cooling potential
Bar-and-plate core for extreme durability and efficient cooling
Turbulated fins evenly circulate fluid through the core
-16 ORB female threads on inlet and outlet for high flow
Cast aluminum end tanks, precision TIG-welded to the core
Eight M8 flush mounting holes with steel inserts
Inlet and outlet on opposite sides for easy line routing
Available in stealth black or silver powder coat
Covered by the Mishimoto Lifetime Warranty
Specifications
Material: 6061 Aluminum
Core Length: 26.59 cm
Core Height: 19.79 cm
Core Depth: 6.48 cm
Rows: 17
Overall Height: 19.79 cm
Overall Length: 35.18 cm
Overall Width: 6.48 cm
Fluid Capacity: 1.32 Liters
Inlet: -16 ORB
Outlet: -16 ORB
Included in the box
Mishimoto Oil Cooler
Mishimoto Lifetime Warranty
