Boost Race Fuel E85 is a fuel with 85% ethanol and 15% gasoline, with added Eurol additive and lubricant. It's the perfect ethanol for those on a slightly lower budget – E85 uses slightly less fuel per hp and is also suitable for ice racing cars as it makes cold starts in winter easier.Exhaust temperature is slightly higher and E85 provides slightly less power than E100. It is important to adjust/map the engine with the correct fuel to achieve maximum power. Teflon hoses with stainless steel filters are a necessity.Specifications
Composition: 85% ethanol, 15% gasoline
Additive: Eurol
Volume: 204 liters
Approved by: Jonus Racing
Shipping: The recipient address must be staffed between 08:00–16:00 on all weekdays.⚠️ IMPORTANT: For closed circuits or approved motorsport facilities only. Forbidden on public roads.
Pure ethanol-based racing fuel. Now delivered pre-mixed with lubricant additive.Boost Race Fuel E100 is based on 99.9% pure alcohol, with a very high calorific value. Boost Race Fuel E100 can be mixed with 15% 98-octane gasoline to create E85. Due to the purity of E100, the combustion and power of this E85 will be better than standard E85.It is important to tune/map the engine with the correct fuel to achieve maximum power.References: Boost Racefuel E100 has been thoroughly tested over time and approved by Jonus Racing. Fredric Aasbø and Tor Anders Ringnes race with Boost Race Fuel E100.Shipping: The recipient's address must be staffed between 8 AM and 4 PM on all weekdays.⚠️ IMPORTANT: For closed courses or approved motorsport facilities only. Prohibited on public roads.
Pure ethanol-based racing fuel.Boost Race Fuel E85 is a fuel with 85 percent ethanol and 15 percent gasoline. Boost Race Fuel E85 contains Eurol additive. This is the perfect ethanol for those on a slightly lower budget, as E85 uses slightly less fuel per horsepower. E85 is also suitable for ice racing cars, as it makes cold starts in winter easier.Exhaust temperature is somewhat higher, and E85 provides slightly less power compared to E100.It is important to tune/map the engine with the correct fuel to achieve maximum power. Teflon hoses with a stainless steel filter are a necessity. We sell a complete range of everything you might need to build a fuel system.Now supplied with lubricating additive.References: Boost Racefuel E85 has been thoroughly tested over time and approved by, among others, Jonus Racing.Shipping: The recipient's address must be staffed between 8 AM and 4 PM on all weekdays.⚠️ IMPORTANT: For closed circuits or approved motorsport facilities only. Forbidden on public roads.
The Walbro GST 450 is an in-tank pump that works great for ethanol. A compact pump that provides enough flow and is easy to install in the tank.Suitable for mounting on original fuel pump assemblies for many cars, including Volvo, Nissan, Saab, Subaru, and Toyota.Specifications
Flow: 450 L/h
Length: 121 mm
Top diameter: 39 mm
Bottom diameter: 50 mm
Inlet: 11 mm
Outlet: 11 mm
Custom fan shroud for Toyota Supra X-Line Performance Aluminum Radiator 1993–1998 and Mishimoto Race Line High-Flow 12" fans.Features
Made from aluminum for the lightest possible weight
Pre-drilled holes for radiator mounting
Pre-drilled holes and welded nut for mounting 2x Mishimoto Race Line High-Flow 12" Fans
SKU: SUP-93-SRD
Custom fan shroud designed for the Mishimoto Universal Dual Pass Race Radiator, Mishimoto Race Line High-Flow 12" and Mishimoto Race Line High-Flow 10" fans.Features
Made from aluminum for the lightest possible weight
Pre-drilled holes for mounting to radiator
Pre-drilled holes and welded nut for mounting 1x Mishimoto Race Line High-Flow 12" Fan + 1x Mishimoto Race Line High-Flow 10" Fan
SKU: DUL_SRD
The Mishimoto Universal Dual Pass Race Radiator is perfect for all types of projects that require exceptional liquid cooling. Made from quality aluminum and designed to maximize cooling efficiency, increase engine performance, and protect your car from overheating.Specifications
Material: Aluminum
Overall Size: 27" L x 19" H x 3" W
Core Size: 21.77" L x 17.24" H x 2.2" D
Rows: 2
Inlet: 1.5"
Outlet: 1.75"
Tank Wall Thickness: 2 mm
Filler Neck: 1.25"
Note: This item is for vehicles with manual transmission. For automatic transmission, purchase the additional Mishimoto Universal Transmission Cooler Kit.Included in the package
Mishimoto Universal Dual Pass Race Radiator
Mishimoto Lifetime Warranty
Every street or track vehicle requires a reliable and efficient cooling system. High oil temperatures accelerate oil degradation and can lead to increased engine wear and potential failure of internal components.The Mishimoto universal 25-row oil cooler is the perfect upgrade to extend your engine's lifespan and ensure proper lubrication of engine components, while maintaining ideal oil temperatures. Nearly 5 cm thick with a total oil capacity of 0.42 liters. Available in silver or black.Specifications
Material: 6061 Aluminum
Cooler Construction: Stacked-plate
Rows: 25
Core Height: 18.59 cm
Core Length: 27.94 cm
Core Depth: 5 cm
Core Size: 27.94 cm x 18.59 cm
Overall Height: 21 cm
Overall Length: 33 cm
Overall Width: 5 cm
Inlet: -10AN
Outlet: -10AN
Fluid Capacity: 0.42 liters
Note: Only one side of the silver oil cooler features the Mishimoto logo. The stealth black option has no logo.Included in the package
Mishimoto Universal 25-Row Oil Cooler
Mishimoto Lifetime Warranty
Mishimoto has developed an all-new universal dual pass oil cooler for enthusiasts who demand the best from their vehicles. Keeping oil temperatures under control is crucial for a successful day on the track, street, or strip.High engine temperatures can promote engine wear and lead to serious internal engine damage. Constructed from high-pressure internal tubing rated at 120 PSI and built to handle the most extreme conditions. With 8mm external fins and 19 rows, it offers an extremely large surface cooling area. Can also cool transmission and power steering fluid.Specifications
Material: 6061 Aluminum
Rows: 19
Core Height: 19.8 cm
Core Length: 30 cm
Core Depth: 3.6 cm
Core Size: 30 cm x 19.8 cm
Overall Height: 21 cm
Overall Length: 37.6 cm
Overall Width: 4.49 cm
Inlet: -10AN
Outlet: -10AN
Fluid Capacity: 0.75 liters
Max Pressure: 120 PSI
Note: Only one side of the silver oil cooler features the Mishimoto logo. The stealth black option has no logo.All our Mishimoto oil coolers come with Mishimoto's lifetime warranty.
The Mishimoto X-Line aluminum radiator is the ideal upgrade from the standard Toyota Supra radiator. It will extend the life of your 2JZ engine. Lightweight 3-row core with welded aluminum end tanks, adapted to the original mounts in the Toyota Supra MK4 – easy installation without modifications.For maximum effect, we recommend installing this aluminum shroud with 2 High-Flow Mishimoto fans.Specifications
Material: Aluminum
Chassis: JZA80
Engine: 2JZGE, 2JZGTE
Fits: Toyota Supra N/A 1993–98, Toyota Supra Turbo 1993–98
Overall Height: 52.8 cm
Overall Length: 75.4 cm
Overall Width: 6.4 cm
Core Size: 40 cm x 73.7 cm
Rows: 3
Inlet: 2.9 cm
Outlet: 2.9 cm
Fill Neck: 3.17 cm
Tank Wall Thickness: 2 mm
DPI: 1855
Drain Plug Length: 1.19 cm
Drain Plug Thread: M16
Note: This item is for cars with manual transmission. For automatic transmission, purchase an additional Mishimoto Universal Transmission Cooler Kit.Included in the package
Mishimoto Radiator
Mishimoto Radiator Cap
Magnetic Drain Plug
Mishimoto Lifetime Warranty
The Toyota Supra X-Line Performance Aluminum Radiator for Toyota Supra 1993–1998 is the ideal upgrade from the standard radiator. Designed to maximize cooling efficiency, enhance engine performance, and protect against overheating – extending the lifespan of your 2JZ engine.Lightweight 3-row core with welded aluminum end tanks, adapted to the original mounts in the Toyota Supra MK4 – easy installation without modifications.For maximum effect, we recommend installing Boost's self-developed fan shroud with 2x 12" High-Flow Mishimoto fans.Specifications
Chassis: JZA80
Engine: 2JZGE, 2JZGTE
Fits: Toyota Supra N/A 1993–98, Toyota Supra Turbo 1993–98
Overall Size: 75.4 cm L x 52.8 cm H x 6.4 cm W
Core Size: 40 cm L x 73.7 cm H x 5 cm D
Rows: 3
Inlet & Outlet: 2.9 cm / 2.9 cm
Tank Wall Thickness: 2 mm
DPI: 1855
Drain Plug Length: 1.19 cm
Drain Plug Thread: M16
Filler Neck: 3.17 cm
Note: This item is for vehicles with a manual transmission. For automatic transmissions, purchase an additional Mishimoto Universal Transmission Cooler Kit.Included in the Package
Mishimoto Radiator
Mishimoto Lifetime Warranty
The Mishimoto aluminum radiator is the ideal upgrade from the standard Subaru BRZ / Toyota GT86 radiator. Lightweight with welded aluminum end tanks, designed to fit the car's original mounts – no modifications necessary.For maximum performance, we recommend installing this radiator with 2 High-Flow Mishimoto fans and an aluminum shroud.Features
Increased cooling capacity
Direct fit for GT86 / BRZ / FR-S
100% brazed aluminum core
TIG-welded
Includes magnetic drain plug and mounting hardware
Mishimoto lifetime warranty
Specifications
Overall Width: 76.5 cm | Overall Depth: 10.9 cm | Overall Height: 41.3 cm
Core Size: 65 x 35.5 cm
Rows: 2 | Inlet/Outlet: 2.9 cm
Chassis: ZC6, ZN6 | Engine: FA20, 4U-GSE
Fits
2013+ Subaru BRZ
2013+ Scion FR-S
2013+ Toyota GT86
The Straight AN8 Boost Performance PTFE Fitting is used with AN8 Boost Performance PTFE Black Nylon Braided Hose or AN8 Boost Performance PTFE Stainless Steel Braided Hose.Boost PTFE Fittings – Optimizing Your Race CarWhen building a race car that truly stands out, the choice of fittings is a crucial factor in achieving maximum performance. Boost PTFE fittings represent a high-tech alternative for car enthusiasts who want to elevate their vehicle's performance to new heights.Boost Performance FittingsSpecially developed to deliver exceptional flow without compromise. Made from the highest standard materials with precise manufacturing techniques. With larger through-bores than standard fittings, Boost Performance fittings ensure optimal flow of fuel, oil, brake fluid, or water – ideal for racers who want to push their car to the limit.Boost Standard FittingsAn excellent choice for track cars and race cars where performance is not necessarily maximized, but where quality is still important. Ideal for those who want good performance in a less intensive setting.The Difference Between Performance and StandardBoost Performance fittings are optimized for maximum flow and performance – ideal for competitive situations. Boost Standard fittings are more aimed at enthusiasts who want an economical alternative with quality and reliability.
The Straight AN10 Boost Performance PTFE Fitting is used with the AN10 Boost Performance PTFE Black Nylon Braided Hose or the AN10 Boost Performance PTFE Stainless Steel Braided Hose.Boost PTFE Fittings – Optimizing Your Race CarWhen building a race car that truly stands out, the choice of fittings is a critical factor in achieving maximum performance. Boost PTFE fittings represent a high-tech option for car enthusiasts who want to elevate their vehicle's performance to new heights.Boost Performance FittingsSpecially developed to deliver outstanding flow without compromise. Made from the highest standard materials with precise manufacturing techniques. With larger passages than standard fittings, Boost Performance fittings ensure optimal flow of fuel, oil, brake fluid, or water – ideal for racers who want to push their car to the limit.Boost Standard FittingsAn excellent choice for track cars and race cars where performance is not necessarily maximized, but where quality is still important. Ideal for those who want good performance in a less intensive setting.The Difference Between Performance and StandardBoost Performance fittings are optimized for maximum flow and performance – ideal for competitive situations. Boost Standard fittings are more aimed at enthusiasts who want an economical alternative with quality and reliability.
V3 is the latest version of the SPD fuel pressure regulator, built on a design that provides superior precision and reliability. Specially designed to work well with ethanol fuel, with new ethanol-resistant components and long service life.The regulator handles high return flows at low engine loads and ensures a 1:1 fuel pressure increase with boost pressure – even with very powerful fuel pumps at high outputs. The diaphragm is available as a spare part, so the regulator can be serviced rather than replaced.Specifications
1/8" NPT outlet at the front for fuel pressure sensor or fuel gauge
1/8" NPT outlet for vacuum connection
Adjustable base pressure: 2.7–5.1 Bar
Compatible with gasoline and alcohol (E85/E100)
Fuel pressure increases 1:1 with boost pressure
Handles power up to and over 1000 hp
For silicone hose or pneumatic connection
Fittings for the regulator included
Color: Black
SKU: SPDB13-7-5-1
Universal return flange for turbo with AN10 38mm CC connection. The AN fitting is designed for PTFE hose and is only available in Black-Black.SPD AN fittings maintain the absolute highest quality available on the market today. All fittings are anodized, making them highly resistant to external influences.Features
Designed for PTFE hose
Anodized for increased durability
Color: Black-Black
Suitable for: gasoline, methanol, ethanol, and diesel
Also works for water and oil systems
5-year warranty on all SPD AN fittings
SKU: 090210
The Mishimoto X-Line Performance Aluminum Radiator for 1989–1994 Nissan 240SX with SR20 engine is the ideal upgrade from the original radiator. Lightweight with a 3-row design, specifically designed for the Nissan 240SX – easy installation without modifications. Comes with a 1.3 bar Mishimoto radiator cap.For maximum performance, we recommend installing this radiator with an aluminum shroud and 2 High-Flow Mishimoto fans.Features
Premium 3-row core for increased strength and reliability
16% thinner tubes than original – more surface area and better cooling efficiency
Higher fin density for increased cooling capacity
More contact points for better heat transfer
3-row design creates more air turbulence for maximum cooling
Includes magnetic drain plug
Includes 1.3 bar high-pressure radiator cap
Mishimoto Lifetime Warranty
Specifications
Material: Aluminum
Chassis: S13
Engine: SR20DE / SR20DET
Fits: Nissan 240SX LE 1991–92, Nissan 240SX SE 1989–94
Overall Width: 49.5 cm
Overall Height: 67 cm
Overall Depth: 6.35 cm
Core Size: 64 cm x 36 cm
Rows: 3
Inlet: 3.76 cm
Outlet: 3.76 cm
Fill Neck: 3.17 cm
Tank Wall Thickness: 2 mm
Drain Plug Thread: M16 / M12 x 1.5
Dual Pass: No
Note: This item is for vehicles with manual transmission. For automatic transmission, purchase an additional Mishimoto Universal Transmission Cooler Kit.Included in the package
Mishimoto Radiator
Magnetic Drain Plug
Additional Mounting Hardware
Mishimoto Lifetime Warranty
The Mishimoto Universal R-Line Intercooler will provide ideal cooling capacity while increasing horsepower and delivering that extra boost every driver appreciates. Constructed from 6061 aluminum and TIG-welded for maximum durability and high boost pressure.The durable bar-and-plate core provides superior heat transfer and effectively reduces AITs. Robust end tanks are cast as a single piece of aluminum.Specifications
Fitment: Universal (front-mounted)
Surface Treatment: Powder Coated
CEM: 1250
Fin Pitch: 15 Fins/Inch
Max Recommended Pressure: 32 PSI
Overall Size: 79 cm L x 30 cm H x 10 cm W
Core Size: 61 cm L x 30.5 cm H x 10 cm D
Inlet & Outlet: 7.6 cm
Material: 6061 Aluminum, TIG-welded
Included in the package
Mishimoto Universal R-Line Intercooler
Mishimoto Lifetime Warranty
The Mishimoto Universal Intercooler M-Line is sleek and stylish, providing the perfect cooling capacity for smaller turbo applications. Constructed from 6061 aluminum and TIG-welded for maximum durability and high boost pressures.The durable bar-and-plate core provides superior heat transfer and effectively reduces AITs. Robust end tanks are cast as a single piece in aluminum.Specifications
Fits: Universal (front mounted)
Surface Finish: Powder-Coated
CEM: 1250
Fin Pitch: 15 Fins/Inch
Max Recommended Pressure: 32 PSI
Overall Size: 79 cm L x 30 cm H x 7.6 cm W
Core Size: 60 cm L x 30 cm H x 7.6 cm D
Inlet & Outlet: 7.6 cm
Material: 6061 Aluminum, TIG-Welded
Included in the box
Mishimoto Universal M-Line Intercooler
Mishimoto Lifetime Warranty
Enthusiasts who push their high-performance vehicles to the limit understand the importance of keeping oil temperatures down to prevent damage or engine failure. The Mishimoto Universal 19 Row Oil Cooler will extend the life of your engine by ensuring essential high-wear engine components like piston rings, skirt, and cam bearings are sufficiently lubricated with cooler oil.Specifications
Material: 6061 Aluminum
Cooler Construction: Stacked-Plate
Rows: 19
Core Height: 5.43"
Core Length: 11"
Core Depth: 1.97"
Core Size: 11" x 7.32"
Overall Height: 6.46"
Overall Length: 13"
Overall Width: 1.97"
Inlet: -10AN
Outlet: -10AN
Note: Only one side of the silver oil cooler features the Mishimoto logo. The stealth black option has no logo.All our Mishimoto oil coolers come with Mishimoto's Lifetime Warranty.
Complete package to provide optimal cooling for the Toyota Supra MK4.The package includes
1 pc Toyota Supra X-Line Performance Aluminum Radiator, 1993–1998
2 pcs Mishimoto Race Line High-Flow 12" Fan
1 pc Custom-made fan shroud adapted for 2x 12" fans from Mishimoto
Fan Shroud
Made of aluminum for the lightest possible weight
Pre-drilled holes for mounting to the radiator
Pre-drilled holes and welded nuts for mounting 2x Mishimoto Race Line High-Flow 12" Fans
Custom fan shroud adapted for Mishimoto Universal Dual Pass Race Radiator, Mishimoto Race Line High-Flow 12" and Mishimoto Race Line High-Flow 10" fans.Features
Made of aluminum for the lightest possible weight
Pre-drilled holes for mounting to the radiator
Pre-drilled holes and welded nut for mounting 1x Mishimoto Race Line High-Flow 12" Fan + 1x Mishimoto Race Line High-Flow 10" Fan
SKU: UDP-Rad-Fans-VK
