Braided PTFE hose for ethanol, methanol, air, water, oil, and more. Sold per meter. 100% reliable with ethanol and methanol – very long lifespan with these aggressive fuels.Also works well with petrol, E85, and diesel. Approved for all oils, brake fluid, and glycol.Specifications Inside diameter: 8.13 mm Working pressure: 206 bar Burst pressure: 689 bar Operating temperature: -70 to 250°C Sold per meter SKU: SPDPTFERF6
160,00 kr
Stainless steel braided PTFE hose for ethanol, methanol, air, water, oil and more. Sold per meter. 100% reliable with ethanol and methanol – extremely long life with these aggressive fuels.Also works well with gasoline, E85 and diesel. Approved for all oils, brake fluid and glycol.Specifications Inner diameter: 4.83 mm Working pressure: 275 bar Burst pressure: 827 bar Operating temperature: -70 to 250°C Sold per meter SKU: SPDPTFERF4
175,00 kr
The Walbro GST 450 is an in-tank pump that works great for ethanol. A compact pump that provides enough flow and is easy to install in the tank.Suitable for mounting on original fuel pump assemblies for many cars, including Volvo, Nissan, Saab, Subaru, and Toyota.Specifications Flow: 450 L/h Length: 121 mm Top diameter: 39 mm Bottom diameter: 50 mm Inlet: 11 mm Outlet: 11 mm
1.599,00 kr
Nozzle extension used to extend the nozzle tip.Specifications Primarily used on short injectors such as Bosch 630cc, 980cc, 1200cc, 1300cc, etc. No built-in filter Fits on the nozzle tip SKU: SPD02SA013 Price per piece
85,00 kr
Top adapter used on top of the nozzle to extend the nozzle tip.Specifications Top adapter to extend the nozzle Primarily used on short nozzles such as Bosch 630cc, 980cc, 1200cc, 1300cc, etc. With built-in filter – filter can be removed Made of aluminum and painted black Viton O-ring Locking clip included Extends the nozzle by 15 mm SKU: SPD02SA012
85,00 kr
Injector lock / clip. Standard clip for most original Bosch injectors. Fits most original Bosch injectors SKU: SPD02SA0113 Price per piece
24,00 kr
Bosch 2200cc high ohm injectors represent the next generation of high flow injector technology. Fast response, excellent flow pattern, and compact design. 100% compatible with ethanol, methanol, and E85. Especially suitable for turbocharged and supercharged engines with high fuel pressure.Static flow rate 43.5 PSI (3 bar): 2200 cc/min = 210 lb/h 58 PSI (4 bar): 2550 cc/min = 240 lb/h 78.5 PSI (5 bar): 2865 cc/min = 273 lb/h 88 PSI (6 bar): 3155 cc/min = 300 lb/h 101.5 PSI (7 bar): 3350 cc/min = 320 lb/h Specifications Coil Resistance: 8.5 Ohm Dead Time: 0.45ms at 14V Spray Pattern: Conical (30°) | Spray Angle: Straight (0°) Connector: Denso / Sumitomo Injector: EV 14K (Compact) Injector Length (O-ring to O-ring): 33.6 mm Diameter: 16 mm | O-ring: 14.5 mm Viton Approved for: Gasoline, alcohol, methanol, E85, CNG NOTE! Do not use with MBTE fuel. When disassembling, the injectors must be kept sealed from oxygen.To extend the injector to EV 14L Long (60–65mm between O-rings), use adapter SPD02SA0116.
1.990,00 kr
You have seen 31 out of 31 products
Bygg et komplett og pålitelig fuelsystem med komponenter fra Boost Motorsport og SPD. Vi tilbyr AN koblinger (AN3, AN4, AN6, AN8, AN10), PTFE stålflettet slange, fittings i 45°/90°/180°/rett utførelse, fueltrykksregulatorer, fuelpumper og dysemateriell.
Alle komponenter er 100% kompatible med bensin, E85, E100, etanol og metanol. SPD-produktene er anodisert og leveres med 5 års garanti. Riktig AN-kobling og PTFE-slange er nøkkelen til et trygt og lekkfritt fuelsystem for racing.
Featured Products
Share information and details about these products
220,00 kr
239,00 kr
115,00 kr
8.000,00 kr
399,00 kr
399,00 kr
