Pure ethanol-based racing fuel.Boost Race Fuel E85 is a fuel with 85 percent ethanol and 15 percent gasoline. Boost Race Fuel E85 contains Eurol additive. This is the perfect ethanol for those on a slightly lower budget, as E85 uses slightly less fuel per horsepower. E85 is also suitable for ice racing cars, as it makes cold starts in winter easier.Exhaust temperature is somewhat higher, and E85 provides slightly less power compared to E100.It is important to tune/map the engine with the correct fuel to achieve maximum power. Teflon hoses with a stainless steel filter are a necessity. We sell a complete range of everything you might need to build a fuel system.Now supplied with lubricating additive.References: Boost Racefuel E85 has been thoroughly tested over time and approved by, among others, Jonus Racing.Shipping: The recipient's address must be staffed between 8 AM and 4 PM on all weekdays.⚠️ IMPORTANT: For closed circuits or approved motorsport facilities only. Forbidden on public roads.
Pure ethanol-based racing fuel. Now delivered with lubrication additive.Boost Race Fuel E100 is based on 99.9% pure alcohol, with a very high calorific value. Boost Race Fuel E100 can be mixed with 15% 98-octane gasoline to produce E85. Due to the purity of E100, the combustion and power of this E85 will be better than standard E85.It is important to adjust/map the engine with the correct fuel to achieve maximum power.References: Boost Racefuel E100 has been thoroughly tested over time and approved by Jonus Racing. Fredric Aasbø and Tor Anders Ringnes use Boost Race Fuel E100.Shipping: The recipient address must be staffed between 08:00 and 16:00 on all weekdays.⚠️ IMPORTANT: For closed courses or approved motorsport facilities only. Prohibited on public roads.
The Walbro GST 450 is an in-tank pump that works great for ethanol. A compact pump that provides enough flow and is easy to install in the tank.Suitable for mounting on original fuel pump assemblies for many cars, including Volvo, Nissan, Saab, Subaru, and Toyota.Specifications
Flow: 450 L/h
Length: 121 mm
Top diameter: 39 mm
Bottom diameter: 50 mm
Inlet: 11 mm
Outlet: 11 mm
The Straight AN10 Boost Performance PTFE Fitting is used with the AN10 Boost Performance PTFE Black Nylon Braided Hose or the AN10 Boost Performance PTFE Stainless Steel Braided Hose.Boost PTFE Fittings – Optimizing Your Race CarWhen building a race car that truly stands out, the choice of fittings is a critical factor in achieving maximum performance. Boost PTFE fittings represent a high-tech option for car enthusiasts who want to elevate their vehicle's performance to new heights.Boost Performance FittingsSpecially developed to deliver outstanding flow without compromise. Made from the highest standard materials with precise manufacturing techniques. With larger passages than standard fittings, Boost Performance fittings ensure optimal flow of fuel, oil, brake fluid, or water – ideal for racers who want to push their car to the limit.Boost Standard FittingsAn excellent choice for track cars and race cars where performance is not necessarily maximized, but where quality is still important. Ideal for those who want good performance in a less intensive setting.The Difference Between Performance and StandardBoost Performance fittings are optimized for maximum flow and performance – ideal for competitive situations. Boost Standard fittings are more aimed at enthusiasts who want an economical alternative with quality and reliability.
A "must-have" product for easily adjusting wheel angles.The Boost Toe Plate Kit makes it easy to check and adjust wheel angles, no matter the situation.How to use it:Place the plates against the rim/tires on the axle you want to measure, then measure the distance between the plate at the front of the tire and the back of the tire. The difference between the measurement at the front of the tire and the back of the tire gives you an indication of how much Toe-in/Toe-out you have. The plates are also made of aluminum, so you can measure camber using an angle gauge (not included) Included in the kit you will find:2 Boost plates2 Measuring tapes (3m)
Every street or track vehicle requires a reliable and efficient cooling system. High oil temperatures accelerate oil degradation and can lead to increased engine wear and potential failure of internal components.The Mishimoto universal 25-row oil cooler is the perfect upgrade to extend your engine's lifespan and ensure proper lubrication of engine components, while maintaining ideal oil temperatures. Nearly 5 cm thick with a total oil capacity of 0.42 liters. Available in silver or black.Specifications
Material: 6061 Aluminum
Cooler Construction: Stacked-plate
Rows: 25
Core Height: 18.59 cm
Core Length: 27.94 cm
Core Depth: 5 cm
Core Size: 27.94 cm x 18.59 cm
Overall Height: 21 cm
Overall Length: 33 cm
Overall Width: 5 cm
Inlet: -10AN
Outlet: -10AN
Fluid Capacity: 0.42 liters
Note: Only one side of the silver oil cooler features the Mishimoto logo. The stealth black option has no logo.Included in the package
Mishimoto Universal 25-Row Oil Cooler
Mishimoto Lifetime Warranty
